The federation
Intranet
ICP-MS
Auteur de la page : Sylvain Campillo
The platform’s plasma spectrometry equipment offers a complete range of elemental analyses in majors, traces and ultra-traces, for samples with various matrices.
The platform also offers access to a "clean" preparation room or Geochemical White Room exclusively dedicated to preparations for elemental analyses in majors, traces and ultra-traces but also isotopes (mineralizations, dilutions, separations, preparation of standards, etc.)
The chemistry room is ISO7 class with a set of consumables specific to geochemical preparations (Teflon containers, ultra-pure water, high purity reagents, etc.)
The elemental mass spectrometry room in the ISTerre laboratory is composed of an Agilent 7900 coupled to an ESI PrepFast IC module, and an ICP-OES Agilent 5800 for major analysis
The ICP-MS is mainly used in the context of research projects at ISTerre and OSUG in collaboration, and more rarely in the context of external services.
The ICP-MS Thermo Xseries-2
The Agilent 7900 ICP-MS is an instrument dedicated to the elemental analysis of rocks, sediments, earth, sludge, peat, various plants, after chemical mineralisation, but also synthetic materials or more simply various liquid solutions (hydrothermal water, groundwater or surface water...)also dedicated to elemental analysis. The detection limit is lower than the last ICP-MS (Thermo X series2) therefore it is dedicated to very poor samples. It will also eventually allow speciation to be carried out via the IC module.
| ICP-MS Agilent 7900 | |
|---|---|
| Scope of use | Mainly collaborations |
| Technical specifications | Sample types Aqueous, with preliminary sampling under specific conditions and packaging (contact us beforehand). Solid, in the form of homogeneous powder and specific solutions (contact us beforehand). technical data Measurements from ppt to ppm in solution according to the elements (9 decades). Average sample analysis time : approximately 10 minutes (including rinsing) for the Xserie2, under development for the 7900 (excluding blank, duplicate and standard analyses) ICP-MS Agilent 7900 is a single Quad ICP mass spectrometer with — >High matrix tolerance due to a robust plasma — >High matrix introduction (UHMI) up to 25% total dissolved solids — >Effective collision and reactive mode to improves accuracy (removing polyatomic interferences) — >High sensitivity and low detection limits closed to ppt — >Wide dynamic range detector up to 10+9 decade, allow analysis of majors and trace in one run Can be update for single particule analysis or laser ablation ICP-MS Agilent 7900 coupled to an Elemental Scientific PrepFast IC (—> in progress) -->allow Automated tuning of the ICP-MS — >Allow automated inline calibration for total metal and speciation — >Can dilute automatically samples — >FAST uptake, stabilization, & washout — >switch automatically between total metal analysis and speciation Permit to save time and improve laboratory efficiency by eliminating labor-intensive standard preparation and sample dilution, and also save consumption and waste Types of analysis Masses 7 to 238, (other elements to be discussed) |
| Quality control | Certified standards |
| Person(s) responsible for the instruments, Team to contact |
|